Review and Buying Guide of TP-LINK TL-POE10R PoE Splitter

Great item, it is effective as it ought to actually. Excellent product, it operates as it need to definitely. The outer shell is a tiny bit of a fingerprint magnet but the shiny coating is pleasant.

Performs properly, neat tiny box. Very first and foremost, terrific, it worksthe variety of voltage outputs out there (5, 9, twelve) is quite smart (despite the fact that my siemens cellphone base station wishes 6. 5 so i won’t be able to use it there, rats) and the equipped cables (both lan and a dc ability connection) are useful. Wonderful tiny box, smaller than a cigarette packet, so quick to cover all-around the back again of most units. Fantastic benefit, as is normally the scenario with tp-link. Other suppliers would charge 30 quid or far more for this.

Generally my fault but the item did do the job high-quality. . I returned this product or service as it was not what i was searching for. This gets rid of the electric power from poe cables and turns it into a non-powered one particular even so i was hunting for just one that injected ability, generally my fault but the product did get the job done wonderful.

Key specs for TP-LINK TL-POE10R PoE Splitter:

  • Enter your model number
    above to make sure this fits.
  • IEEE 802.3, 802.3u, 802.3af
  • Operating temperature range:0 – 40 °C

Comments from buyers

“Easy on the eye and easy to use, BEWARE: power is not isolated!, neat, tidy, small, just works (r), One little fault., perfect for SmartThings hub, mainly my fault but the product did work fine.”

Effortless on the eye and quick to use. I’ve been using devices with poe receivers created in for a couple of many years, but preferred to develop the utilization to equipment that do not have that operate. Now i can use a single, simple to set up, cat5 cable to install wi-fi entry factors and other (very low electric power) network tools wherever in my residence or garden without the need of having to compromise on the operation of the product for the reason that it won’t have poe built in. The unit’s about the dimension of a cigarette packet, with a polished plastic case. A single end has a lan port which you plug into the network, and a stepper change that goes from 5v, to 9v, to 12v. The other conclusion has a lan port that connects to your unit, a electricity output socket, and a led to show the device is working. It is a good deal much more discrete that the trendnet tpe-104s, in both of those dimensions and the fact the trendnet has an led to show which power setting has been selected and another to demonstrate the unit is operating, equally on the prime of the unit, even though this tp-link unit has its led on the back, so it can be out the way. It does lack correcting brackets, but i’m working with sticky ft to attach it to my wireless obtain issue, which means i can transfer it to where by i need it rather than to the wall. If you previously have an ieee 802. 3af suitable community, this is extremely valuable and more affordable solution than the competitiveness, perfect for home consumers.

Extremely basic to use and assortment of dc electrical power out voltages entirely solved my electricity offer difficulties.

I obtained 3 of these, they labored out of the box, but no excellent when utilizing with a item that is grounded. It shorted out my ip digital camera when i connected the digicam to the outside the house of my metallic constructing, is effective great if item is not grounded. You can find out additional information if you google it, i would like i did initial as i now have a £110 ip digicam as a paperweight.


One thought on “Review and Buying Guide of TP-LINK TL-POE10R PoE Splitter

  1. Verified Purchase
    Very simple to use and range of dc power out voltages completely solved my power supply issues.
  2. Verified Purchase

    This review is from : TP-LINK TL-POE10R PoE Splitter

    Perfect for smartthings hub. Does exactly what i wanted – powers a smartthings hub from a netgear gs308p-100uks 8-port gigabit switch with 4-port poeonly complaint is lack of fixing points, so you’ll need some sticky pads.
  3. Verified Purchase

    This review is from : TP-LINK TL-POE10R PoE Splitter

    Mainly my fault but the product did work fine. . I returned this product as it was not what i was looking for. This removes the power from poe cables and turns it into a non-powered one however i was looking for one that injected power, mainly my fault but the product did work fine.
  4. Verified Purchase

    This review is from : TP-LINK TL-POE10R PoE Splitter

    Great product but pricey when you need to buy several of them. . Active splitters are good for turning non-poe appliances over a poe network. I bought 4 to power turn non-poe cctv cameras over poe.
    • Verified Purchase
      Good product, it works as it should really. Good product, it works as it should really. The outer shell is a little bit of a fingerprint magnet but the glossy coating is nice.
      • Verified Purchase
        We use these in an educational environment for wi-fi aps, poe telephones where poe switches are not a cost-effective solution.
  5. Anonymous

    This review is from : TP-LINK TL-POE10R PoE Splitter

    May need different adaptor to fit device. Seems to work ok with my edimax access point. Only problem i had was the dc/dc adaptor supplied, which was the wrong size to fit the edimax device, so i had to cannibalise the original edimax power adaptor to get it working. An additional adaptor cable or converter in the box would be useful.
  6. Verified Purchase

    This review is from : TP-LINK TL-POE10R PoE Splitter

    Beware: power is not isolated. This means if you try to power a device that’s grounded (eg a raspberry pi which is connected to an hdmi monitor) then it won’t work (i actually killed a board by connecting a uart ground pin to a usb serial converter: i measured -48v on the ‘ground’ from the supply).
  7. Verified Purchase

    This review is from : TP-LINK TL-POE10R PoE Splitter

    I got 3 of these, they worked out of the box, but no good when using with a item that is grounded. It shorted out my ip camera when i attached the camera to the outside of my metal building, works perfect if item is not grounded. You can find out more information if you google it, i wish i did first as i now have a £110 ip camera as a paperweight.
    • Verified Purchase
      This device works a treat as a poe terminator for. This device works a treat as a poe terminator for my security camera. The one thing to note is that you have to allow additional space around the device for the rj45 and power connectors to feed in.
  8. Verified Purchase

    This review is from : TP-LINK TL-POE10R PoE Splitter

    Works great with my trendnet poe switch and happily provided 1. 5a at 5v on the dc jack (supposed to do 2a but best to play safe imo). Useful to have a switch for other voltages in case i need them at some point in the future. Small and smart box and seems well made so cant complain, especially given the price beats any other splitter i could find at the time (other than dodgy chinese clones).

Comments are closed.